Keep in mind that you will need a Mikrotik CHR License if you plan to use it with more than 1Mbps after the trial license expires. We recommend to read and follow this guide for securing your mikrotik router. You should now be able to connect using winbox.ĭon’t forget to update the CHR to the latest version and set up the firewall to only accept access from your trusted IPs (Don’t leave everything exposed). We add the default route /ip route add dst-address=0.0.0.0/0 gateway=2.56.212.1Īnd we set up DNS (we recommend google dns) /ip dns set servers=8.8.8.8,8.8.4.4 We next configure the IP address on this interface /ip address add address="2.56.212.40/24" interface=ether1 The WAN interface (which should be the only one) is ether1. (Please use a really strong password) /user set 0 password="123456" Without a dhcp server, assignment of IPs can become a fulltime job, and if not properly done, there will IP conflicts. This should be done before the network configuration is set. To configure a default route on Mikrotik, click on IP> route> enter gateway to destination 0.0.0.0/0 Configure dhcp server In most cases, a dhcp server will be required to help lease out IP addresses to connected users. The second thing to do is to change the admin password. Enter admin as the username and just press enter when asked for the password. A new window will be opened with the novnc console.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |